Industrial roller door: What are the most common type of problem faced in industrial roller shutter door?

Saturday March 2, 2019
Industrial roller door What are the most common type of problem faced in industrial roller door

Industrial roller door: What are the most common type of problem faced in industrial roller shutter door?

London: If you have installed Industrial roller shutter in your premises then it will eventually lose it working mechanism after some time. Especially if you are using them on daily basis and you are not maintaining them properly then they will not operate properly. One of the factors that will degrade the performance is environmental factors.

  • Torsion Spring
If your roller shutter does not rise properly, this might happen due to broken torsion spring. The doors operate with lifting power through torsion spring and this mechanism is specially used in electric doors. The springs will wear out after using it for a while. It is very common that they are more vulnerable to rusting.
  • Damaged Rollers
The roller shutters door sits on the wheels, and the track helps the door to move along with it. During manufacturing, if the company has used the best quality material and components then the shutters will last for a long time. It is obvious that after some time the rollers will wear out completely and you cannot operate the shutters easily. Sometimes the wheel becomes so small that it pops out from its track. If you use metal roller shutters then they are more prone to rust and corrosion. The best option is to replace them once they are damaged.
  • Misalignment
The roller shutters run on metal tracks and if they get damaged then it will disturb the alignment of the door. If the tracks are not properly aligned then it can also ruin the track or burn the motor when you are trying to operate the shutters. If you notice the problem early, then it is very easy to get rid of this issue. For effective working of the shutters either check the working of the shutters after some months or hire a professional for shutter repair.
  • Panel damage
Sometimes while loading or unloading of the heavy products can hit the shutters which can damage the door panel. The surface of the panel will get damage and in some cases, you might have to replace the entire shutter.
  • Cracked Sealant
On the shutters, weather sealant is used for keeping the water out. It also prevents noise and seals air leaks. If you notice any type of crack in these, then you have to replace them with new sealant.
  • Damaged cable
The shutters have cable and it depends on which type of shutter you have. If the cable break due to some reason, then it will not move. The spring systems work by ensuring the safety measure. Using them regularly then damage the cables. One of the common issues that you will face is doors will shake or squeak when you operate them. It is better to check the cables from time to time. If they break down completely then you have to replace them.